Typical Property Chart : Extrusion grades (Non-Film) Grade MF(I2) (gm/10min) ASTM D-1238 Density@23 dec C (gm/cc) ASTM D-1505 Tensile@yield (%) (Kg/cm²) ASTM D-638 Elong@yield (%) ASTM D-638 Flexural Modulus (Kg/cm²) ASTM D790 Izod Impact (KG-cm/cm) ASTM D256A VSP (Deg C) ASTM D-1525 G-lene HDPE C43D006 0.6 0.943 190 14 5000 - 116 E45A003 0.6 0.945 190 14 5700 - 113 J43A002 0.25, I5=1.0 0.944 200 17 6000 32 124 W50A009 0.9 0.950 220 12 5070 - 123 G-lene LLDPE E36A003 6 0.932 150 14 4600 - 118 G-lex HDPE E52A003 0.28 0.954 240 12 7100 23 122 P54A001 0.06, I5=0.3 0.954 255 11 8500 DNB 123 W52A009 0.9 0.952 210 13 6100 - 125 W52ASR009 0.5 0.964 275 11 8550 - 126 TYPICAL PROPERTY CHART : Extrusion grades (Film) Grade MF(I2) (gm/10min) ASTM D-1238 Density@23 deg C (gm/cc) ASTM D-1505 Tensile@break MD/TD (Kg/cm²) ASTM D-882 Elong@break MD/TD (%) ASTM D-882 Tear Strength MD/TD (gm/mic) ASTM D-1922 Dart impact (gm/mic) ASTM D-1709 C.O.F. Static / Dyn ASTM D-1894 G-lene HDPE F56A003 0.3 0.956 450/400 750/850 0.7 / 7 <=1 0.23/0.22 Film Thickness = 50 microns, BUR=2.1 G-lene LLDPE F20A009 0.9 0.918 430/320 760/860 4.0/10 3.4 0.5/0.44 F20S009 0.9 0.918 430/320 760/860 4.0/10 3.4 0.16/0.13 F20S020 1.8 0.918 325/280 775/900 3 / 8 2.5 0.20/0.17 F20A020 1.8 0.918 350/300 775/900 3 / 8 3.2 0.5/0.44 E20AN009 0.9 0.918 380/300 760/800 4.0 / 10 3.2 0.5/0.44 Film Thinkness=40 micron, BUR=2.1 G-lex HM-HDPE F55HM0003 0.06, I21=9 0.954 500/420 500/600 3 / 9 7 0.22/0.21 Film Thinkness=15 microns, BUR=4.0 Typical Property Chart : Extrusion grades (Non-Film) Grade MF(I2) (gm/10min) ASTM D-1238 Density@23 dec C (gm/cc) ASTM D-1505 Tensile@yield (%) (Kg/cm²) ASTM D-638 Elong@yield (%) ASTM D-638 Flexural Modulus (Kg/cm²) ASTM D790 Izod Impact (KG-cm/cm) ASTM D256A ESCR (F50) Hrs (10% legal) ASTM D 1693 VSP (Deg C) ASTM D-1525 G-lene HDPE I60A/U080 8.0 0.960 255 11 8200 9.0 <48 126 1-I50A180 18 0.960 206 12 6050 2.5 <10 120 G-lene LLDPE R35A042 4.2 0.935 190 14 4590 - 300 114 I24A530 50 0.924 145 20 3260 - <10 80 G-lex HDPE B52A003 0.3 0.952 240 11 7100 20 >400 122 B63A003 0.3 0.963 285 10 10000 60 >40 130 B55HM0003 0.05,I21=9.0 0.955 230 13 8780 DNB >600 129 I58A180 18 0.958 240 10.5 8900 3 2 119 Typical values based on injection moulded specimen; not to be taken as specification. These datas superseed all our respective grades Application Legends: F=Film; I=Injection Moulding; W=Woven Sacks; M=Monofilament; P=Pipe; R=Roto Moulding; B=Blow Moulding; E=Extrusion; C=cable Insulation grade; HM=High Molecular grade; J=Jacketing Pipe for OFC Additive Legends: S=Slip additive;A=Anti-oxidant;U=UV Stabiliser; AN=With Antioxidant/No anti block All relevant grades meet the requirements of BIS Standard 10146-1982 on "Specification for PE for its safe use in contact with foodstuffs, pharmaceutical, and drinking water". It also conforms to the positive list of constituents as prescribed in BIS 10141-1982 and passes the "undue toxicity test" Disclaimer: The data, information and suggestion contained herein are given purely as a guide